 |
Adhesive
colltex® adhesive tube for total renewal
of adhesive coatings, including instructions for use.
Contains 75 ml |
 |
 |
quicktex
colltex® adhesive pads –
no-nonsense help when the ends of adhesive ski skins detach while you
are skiing. Ideal for treating heavily used adhesive ski skin ends and
dirty areas.
Contains 10 pads
|
|
 |
quickspray
The colltex® adhesive spray for use
while skiing. Ideal for treating heavily used adhesive ski skin ends
and dirty areas. Not suitable for total renewal of adhesive coatings.
Contains 75 ml |
|
 |
transfer
tape
Adhesive on transfer film for total or partial renewal of adhesive coating,
simply by ironing on. Including instructions
for use. Available in widths of 68, 100, 115 mm.
Rolls of 50 m |
|
|
skinproof
Water-based impregnating agent for natural and synthetic adhesive ski
skins. Counteracts wrinkling and improves the gliding properties of
the adhesive ski skin.
125 ml can |
|
|
Impregnating
wax
colltex® special paraffin prevents
wrinkling for long periods, and improves the gliding properties of the
adhesive ski skins.
Ideal while skiing.
Contains 30 g |
|
|
Protective
film
Protect your adhesive ski skins against dirt and drying out with multi-use
colltex® protective film. Available
in widths of 80, 110, 130 mm.
Contains 2 strips, length: 2 m |
|
|
End
hook set
Spare parts for ski skins with combi fixing system
from colltex®. 2 end hooks and 6 rivets. |
|
|
Plastic
end hooks
to the camlock fixing system
Available in 3 thicknesses: 1.5, 2.0, 2.5 |
|
|
Ski
skin bag with microfibre cloth
For safely keeping adhesive ski skins. Caution: never leave wet ski
skins in the skin bag. Microfibre cloth for cleaning and drying ski
running surface. Please make sure that ski running surface is dry, clean
and free from dirt and ice crystals. After drying place microfibre cloth
inside ski skin bag with velcro strip. Dimensions: 335 mm x 190 mm |
|
|
Soldering
bit including spatula attachment
Ideal for cleaning the adhesive area and for preparing to apply a new
coating of adhesive.
220 V, 100 W, with 1.3 m electric cable |
